Yanmu offers for blast furnace various type of refractory brick, whose anti-abrasion property, physical strength, refractoriness, corrosion-resistance are properly balanced and optimized in different part of blast furnace. By doing that, we...

This product is manufactured from high purity SiC as aggregate, mixed with silica powder and other additive, which are sintered together in nitriding furnace at high temperature. It is characterized by excellent resistance to thermal shock,...

This product is manufactured from high quality silicon carbide, mixed with silica powder and other additive, and sintered together at around 1500C. Compared with Si 3 N 4 bonded SiC brick, it is characterized by better resistance to corrosio...

This product is manufactured from high quality fused and sintered alumina, mixed with silica powder. It inherits high physical strength and excellent resistance to thermal shock from Sialon material, and the superior resistance to alkali met...

Due to its property of high conductivity, low surface wettability and low permeability of molten iron, carbon brick is used extensively in bosh, hearth and bottom of blast furnace. Yanmu offers various carbon brick used for different applica...

Micro-pore corundum brick is produced from fused Alumina as raw material with special additives through certain processing mechanism, so that microspores are properly formed. Its superior alkali-resistance, slag-resistance and proportion of...

Chamotte abrasion-resistant castable, for instance, is used to fill the gap between the cooling stave and furnace shell or between brick and furnace shell in upper stack, also form part of the pipe for crude coal gas. Similarly, self-flowing...

Water-free injection mix is used to fill the gap between outer shell and cooling stave, which would form a protection layer and extend the service life of a blast furnace. Corundum ramming mix and carbonaceous ramming mix are used to fill th...

Yanmus taphole mix is Al 2 O 3 -SiC-C based high-end refractory product, which is produced from high quality raw material such as fused alumina, mullite, coke, silicon carbide and silicon nitride. It features high plasticity, short sintering...

This product is used for the main runner or iron runner of small- or medium-sized blast furnace. One of the advantages of this product is that tapping can be done right after the installation without baking, which would significantly enhance...

This product is manufactured from high quality fused alumina, bauxite and SiC as main raw material, which is mixed with quick-drying agent. Tapping can be done after 2-3 hours baking, which significantly enhance the tapping operation efficie...

This product is Al 2 O 3 -SiC-C based monolithic refractory product and is designed for runner of large-sized blast furnace. It is characterized by its good resistance to abrasion, corrosion and excellent durability under long-term charging...

By repairing operation of iron runner gunning mix features in general less labor intensity during installation, shorter installation time and lower material consumption than shotcreting mix. Yanmus gunning mix exhibits a good resistance to c...

This refractory castable is used for the runner cover of large-sized blast furnace. It is designed to prevent the heat-loss and to enhance the safety of operation employee....

Standard refractory silica-, chamotte- and high-alumina-bricks are used in typically in checker chamber and ceramic burner....

Yanmus premium silica brick features low creep, high thermal stability at high temperature and good price performance ratio. So it is used extensively for checker brick and lining brick in e.g. upper checker chamber or combustion chamber....

The series of chamotte and high-alumina brick feature low thermal creep and high thermal stability. They can be used extensively in various parts of hot blast stove such as wall, checker chamber, combustion chamber, and wall of blast mixing...

While Yanmus mullite-brick share the same low creep and high thermal stability at high temperature with silica brick, it features a bigger thermal capacity and better thermal stability at low temperature. These properties combined would enha...

Andalusite bbrick is an advanced refractory and is used typically for hot blast stove with very high operation temperature, e.g. above 1350C or even 1450C....

Dense chamotte castable, thermal shock resistant castable and castable for pipe are used in bottom, combustion chamber, ceramic burner, blast pipes flue pipe respectively....

Various silica-, aluminosilicate-, chamotte- and high-alumina-mortar are used for laying brick with corresponding materials in hot blast stove....

This product is used to form the insulation layer of combustion chamber, blast mixing pipe and hot blast pipe of hot blast stove....

This product is used for arch spring of hot blast stove....

This product is manufactured from high-grade bauxite, fused alumina, silicon carbide and graphite as raw material and phenolic resin as binder, by mixing, high-pressure molding and low-temperature thermal processing. This product features g...

Chamotte Brick is used for permanent (safety) lining of torpedo ladle....

High Alumina- and Mullite-based refractory castable is used for mouth of torpedo ladle. Al 2 O 3 -SiC-C-based castable is used for mouth or impact zone, and Alumina-based castable is used for permanent lining....

High-Alumina- or Al 2 O 3 -SiC-C-based spraying mix is used together with corresponding refractory brick or castable in wearing lining as well as mouth of torpedo ladle, in order to extend its service life....

Al 2 O 3 -SiC-C based refractory mortar is used for laying the Al 2 O 3 -SiC-C brick in torpedo ladle....

Desulfurization spraying gun is a key component of magnesia-spraying-desulfurization process in hot-metal-pretreatment. This product is low-cement castable which produced from fused alumina, mullite and high-grade-bauxite as raw material and...

Desulfurization and dephosphorization agents are used for desulfurization- and dephosphorization-process respectively in torpedo ladle. Slag accretion agent is used in hot-metal-pretreatment to thicken the slag after desulfurization and to a...

This product is manufactured from high-grade bauxite, fused alumina and silicon carbide. During the production (ultra) low cement technique is applied so that the physical and thermal property of the product during the operation phase is enh...

This High-Alumina Castable is used for build permanent (safety) lining of hot metal mixer and hot metal transfer ladle....

This gunning mix is used for repairing the working lining of hot metal mixer and hot metal transfer ladle. It can significantly extend the service life of the mixer/ladle, due to its good resistance to slag corrosion, thermal shock and abras...

This product is manufactured from high-grade bauxite, fused alumina, silicon carbide and graphite as raw material, plus phenolic resin as binder and anti-oxidation. Mixing, high-pressure molding and low-temperature thermal processing are car...

This product is Al 2 O 3 -SiC based castable and is used extensively in various type of hot metal transfer ladle. The raw material selection, raw material quantity, particle size distribution, and selection of additives and binder is careful...

This Al 2 O 3 -SiC based refractory mortar is used for laying the Al 2 O 3 -SiC-C brick in hot metal transfer ladle....

By sintering machine, chamotte and high-alumina bricks are used to form the sidewall and roof (working lining) of ignition furnace. Whereas the burner of ignition furnace is protected by high alumina brick in most cases. Different brand of p...

By sintering machine, this product is applied to form the whole or parts of the working lining of ignition furnace. Our experience shows that ignition furnace with this monolithic lining feature a better structural stability, higher installa...

This product is manufactured from electric calcined anthracite by burning at medium temperature at reductive atmosphere. It features high refractoriness, high thermal stability, good thermal conductivity and good electrical conductivity. The...

With high-temperature electric calcined low-ash anthracite, premium graphite and silicon carbide as raw material, this product is manufactured by high-frequency high-pressure vibrate-molding, high temperature burning and fine polishing. It f...

Yanmus offers series of semi-graphite forming monolithic refractories in ferroalloy metallurgy, above all the submerged arc furnace for ore, for filling the gap between carbon bricks especially at the bottom....

This product is manufactured from different types of magnesia by burning at medium- or high-temperature. It features good resistance to slag molten and good thermal conductivity. Therefore it is used primarily for wearing lining of submerged...

This product is applied primarily at the bottom of submerged arc furnace for ore....

These products have both fire resistance and insulation property and therefore can serve as either working lining or insulating layer for thermal equipment. It features low volume weight, relatively high thermal strength, low thermal expansi...

Yanmus chamotte and high-alumina insulating refractory brick features relatively high thermal strength and high thermal shock resistance. By sintering machine, it is used in the insulating layer of ignition furnace and it serves to enhance t...

This product is used for the insulation layer of furnace or kiln in ferroalloy metallurgy....